[. . . ] 3-274-294-11(1) Getting Started IC Recorder Operating Instructions Basic Operations Various Recording Modes Playback/Erasing Editing Messages Utilizing the Menu Function Utilizing Your Computer Troubleshooting Additional Information Index ICD-UX60/UX70/UX80 © 2007 Sony Corporation For customers in Europe Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. [. . . ] When you set the DPC switch to "ON, " you can adjust the speed of the playback in a range from +100% to ­50%. ­30%* DPC GB Menu items EFFECT Settings (*: Initial setting) POP: Stresses middle ranges, ideal for vocals. OFF*: The EFFECT function does not work. Note EASY SEARCH When playing back messages using a built-in speaker, the EFFECT function does not work. Utilizing the Menu Function Sets the easy search function. ON: You can go forward for about 10 seconds by pressing and go back for about 3 seconds by pressing . This function is useful when attempting to locate desired point in a long recording. When you press or , a message will be moved forward or backward. GB Menu items PLAY MODE Settings (*: Initial setting) Sets the playback mode. 1 FILE: When a message is played back, the IC recorder stops at the beginning of the next message. ON*: A beep will sound to indicate that an operation has been accepted. OFF: No beep sound will be heard. BEEP Note LED The alarm sounds even if you set "BEEP" to "OFF" in the menu. Turns the operation indicator on or off during operation. ON*: During recording or playback, the operation indicator lights or flashes. OFF: The operation indicator does not light or flash, even during operation. Note When the IC recorder is connected to a computer, the operation indicator lights or flashes even if "LED" is set to "OFF. " 0 GB Menu items BACKLIGHT Settings (*: Initial setting) Turns the backlight in the display window on or off. OFF: The backlight in the display window does not light, even during operation. Before attempting to move a message, select the message to be moved and then go to the menu window. ON: To set the alarm, select "ON" and set the date, time or day of the week or choose daily for playback. Press /MENU to return to the folder window before erasing the messages and select a folder from which all messages are to be erased, and then go to the menu window and select "EXECUTE. " The selected message will be erased (page 32). Before erasing the message, select a message to be erased, and then go to the menu window and select "EXECUTE. " MOVE ALARM Utilizing the Menu Function ERASE ALL ERASE A FILE 1 GB Menu items DETAIL MENU Settings (*: Initial setting) SELECT INPUT Selects the external input to be recorded that is connected to the (microphone) jack. MIC IN*: Select when you record messages using an external microphone. DATE & TIME Sets the clock by setting year, month, day, hour, and minute in sequence (page 15). EXECUTE: "FORMATTING . . . " appears and the drive will be formatted. CANCEL*: The drive will not be formatted. Notes Use the IC recorder formatting function to format the memory. When the memory is formatted, all the data stored in the IC recorder will be erased. Once the memory has been erased, you cannot retrieve the data that was erased. GB Menu items Settings (*: Initial setting) USB CHARGE Sets whether battery will be charged using a USB connection or not. [. . . ] the USB AC adaptor connected to the IC recorder should not be connected to or disconnected from the AC outlet. If the IC recorder is required to process a large amount of data, the start-up window may be displayed for an extended period of time. While a USB AC adaptor (not supplied) is being used, the remaining battery/charging indicator does not appear in the display window. Additional Information 1 GB Precautions On power On noise Operate the unit only on 1. 5 V or 1. 2 V DC. Use one LR03 (size AAA) alkaline battery or one NH-AAA rechargeable battery. [. . . ]